View source for IBHLink S7++:Settings within TIA® without IBHNet driver


Starting with firmware version 2.146 of the '''''IBH Link S7++ / S7++ HS''''', it is possible to communicate without using the '''''IBHNet''''' driver. In S7 for Windows<sup>®</sup> the support is already fully integrated. If the TIA<sup>®</sup> Portal is used, the '''''IBH Link S7++ / S7++ HS''''' can be inserted in the project as a gateway station. If the '''''IBH Link S7++ / S7++ HS''''' is used as a gateway, all stations behind the '''''IBH Link S7++ / S7++ HS''''' can be accessed via MPI<sup>®</sup> as well as via PROFIBUS.

* Starting with firmware version V2.146 the configuration of the '''''IBH Link S7++ / S7++ HS''''' may also be made with a standard webbrowser. Therefore it is deliverend with the default IP address 192.168.1.15.
* If the MPI<sup>®</sup> and IP address from '''''IBH Link S7++ / S7++ HS''''' are known, it can be setup as a gateway station via MPI<sup>®</sup> or Profibus within a S7 Projekt as PLC 6ES7 412-2EK06-0AB0 V6.0. The IP and MPI/Profibus addresses within the gateway station need to be set equal to the addresses within the '''''IBH Link S7++ / S7++ HS'''''. '0' should be avoided. In our sample the '''''IBH Link S7++ / S7++ HS''''' has the IP address 192.168.10.126 and MPI address 31.


[[Image:TIA_Config_eng.png|frame|none]]


Because the online access will be established directly via Ethernet without additional driver, the correct network card must be selected within PG/PC Interface:


[[Image:TIA_Online_eng.png|frame|none]]